Homepage | Products | |

Rose finish interior exterior

Loading Updating cart...
Print



SAR 0 /

Rose finish interior exterior

Rose finish interior exterior

A superior quality of acrylic emulsion based on acrylic copolymer and some inert pigments suitable for interior / exterior uses.

It is recommended for the use of most of the interior substrates like walls, ceilings of concretes, plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used as an excellent finish coat for any substrate. Provides very good hiding, color retention, alkali resistant, vapour permeable and adhesion behavour.

Color

White or any requested color.

Finish

Flat

Density (gm/cc)

1.57

Volume Solids %

37%

Theoretical Spreading Rate

12.5 sq. mt. / lt at 30 micron DFT(depends upon the substrate condition and method of application).

Washability

100 – 150 cycles

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

حسب The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.

Range

Typical

Maximum

Minimum

Wet Film Thickness (micron)

120

150

80

Dry Film Thickness (micron)

44

55

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

2 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Clean water

Clean water

Volume of Thinner

0 – 5%   0 – 5%

5 – 10% app

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• Apply 1coat of Masonry Primer ( RS-6498 ).
• W/B plastic putty ( Rose No. RS-6350 ) can be applied and which can be sanded , cleaned and dried before the application of top coat finishes.
• 1-2 coats of RS-6191 as top coat can be applied over the filler coat .

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.

Создание сайтов на 1С-Битрикс: разработка дизайна сайта и интеграция с продуктами 1С технический аудит ?тут

×

اتصل بنا

هاتف: 7700 670-12-966+   فاكس: 1643 675-12-966+   صندوق بريد: 15162 جدة 21444، المملكة العربية السعودية  بريد إلكتروني : info@rosepaints.com