Homepage | Products | Exterior Paints|

Rose acrylic sealer

Loading Updating cart...
Print


SAR 115 / 15 Liters

Rose acrylic sealer

Rose acrylic sealer

An excellent quality pigmented primer sealer based on acrylic emulsion with good sealing and binding properties.

It is recommended for the use of most of the interior substrates like walls, ceilings of concretes,
plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used as an
excellent foundation coat for various emulsion and texture finishes. Provides very good sealing and adhesion behaviour on porous substrates.

Color

White or any requested color.

Finish

Flat

Density (gm/cc)

1.48

Volume Solids %

34%

Theoretical Spreading Rate

11 sq. mt. / lt at 30 micron DFT(depends upon the substrate condition and method of application).

Washability

200 – 300 cycles

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

Gallon Size

15 Liters

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.

Range

Typical

Maximum

Minimum

Wet Film Thickness (micron)

120

150

90

Dry Film Thickness (micron)

40

49

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

4 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Clean Water

Clean Water

Volume of Thinner

0 – 5%   0 – 5%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• Apply 1 coat of Rose Acrylic Sealer RS-6499
• W/B plastic putty ( Rose No. RS-6350 ) can be applied and which can be sanded , cleaned and dried before the application of top coat finishes.

• A suitable top coat can be applied over the filler coat .

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.

×

Contact Us here

Tel. +966-12-670 7700    Fax: +966-12-675 1643    P.O.Box 15162 Jeddah 21444, Saudi Arabia    Email : info@rosepaints.com