Rose décor undercoat
Product Description
A superior quality undercoat finish based on alkyd resin pigmented with titanium di-oxide and some other inert pigments. It is specially designed to provide excellent hiding as approved by SASO.
Principle Uses
It is recommended for the interior and exterior surfaces like wooden surfaces, metallic surfaces, cement rendering, plasters, gypsum board etc. It provides good hiding , color retention, excellent adesion and very good scrub resistance.
|
Color |
White or any requested color |
|
Finish |
Matte |
|
Density (gm/cc) |
1.46 |
|
Volume Solids 55% |
40% |
|
Theoretical Spreading Rate |
10 sq. mt/ lt at 40 micron DFT(depends upon the substrate condition & method of application) |
|
Washability |
N/A |
|
Overcoat Interval |
9 hours |
|
Flash Point |
38 deg. cel |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallonn size |
15 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
|
Range |
Typical |
Maximum |
Minimum |
|
Wet Film Thickness (micron) |
87 |
108 |
87 |
|
Dry Film Thickness (micron) |
40 |
50 |
40 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
5 hours |
3 hours |
2 hours |
|
Drying Time (S/D) |
10 hours |
6 hours |
4 hours |
Application Guidelines
|
|
Air spray / Airless spray |
Brush/Roller |
|
Type of Thinner |
Rose cold thinner |
Rose cold thinner |
|
Volume of Thinner |
0 – 5% 15 – 20% |
5 – 10% |
|
Nozzle Orifice |
0.021 1.5-2.0mm |
- |
|
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• 1 coat of RS-5335 can be applied on the wooden or metallic surfaces before the application of any suitable top coat.
• A suitable filler coat is required for better finish.
• Any suitable top coat can be applied on the dried and clean primed surfaces.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
