Product Description
A high quality coarse texture finish based on acrylic emulsion pigmented with granulates,pigments, and extenders. It is suitable for interior and exterior walls and cellings resulting in a coarse textured finish.
Principle Uses
It is recommended for the use of most of the interior substrates like walls, ceilings of concretes, plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used for excellent varieties of texture finishes. Provides water resistant, alkali resistant, good color retention , water-vapour permeable behaviour .
Technical Data
Color |
White or any requested color. |
Finish |
Flat |
Density (gm/cc) |
1.72 |
Volume Solids % |
52% |
Theoretical Spreading Rate |
1.0 - 1.7 sq.mt. / kg (depends upon the substrate condition and method of application). |
Washability |
N/A |
Overcoat Interval |
N/A |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Gallonn size |
25 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.
Application Details
Range |
Typical |
Maximum |
Minimum |
Wet Film Thickness (micron) |
400 |
500 |
300 |
Dry Film Thickness (micron) |
208 |
260 |
156 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
5 hours |
3 hours |
2 hours |
Dry Time (H/D) |
22 hours |
15 hours |
10 hours |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
Clean water |
Clean water |
Volume of Thinner |
0 – 5% 0 – 5% |
5-10% app |
Nozzle Orifice |
0.022 1.5-2.0mm |
- |
Nozzle Pressure |
2100 psi 3 – 5 bar |
- |
Paint System Advice
• Apply 1 coat of Rose Masonry Primer Interior ( Rose No. RS-6498 )
• Not required any filler coat.
• RS-6295 can be used as texture coat. On drying of texture coat any clear coat , pigmented coat of Chemicoat or Polyurethane can be applied .
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use.
Tel. +966-12-670 7700 Fax: +966-12-675 1643 P.O.Box 15162 Jeddah 21444, Saudi Arabia Email : info@rosepaints.com