Homepage | Products | Exterior Paints|

Rose fine texture

Loading Updating cart...
Print


SAR 115 / 25 Liters

Rose fine texture

Rose fine texture

A high quality fine texture finish based on acrylic emulsion pigmented with granulates,pigments, and extenders. It is suitable for interior and exterior wall and cellings resulting in a fine textured finish.

It is recommended for the use of most of the interior substrates like walls, ceilings of concretes, plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used for wide varieties of texture finishes. Provides water resistant, alkali resistant, good color retention , water-vapour permeable behaviour .

Color

White or any requested color.

Finish

Flat

Density (gm/cc)

1.80

Volume Solids %

61%

Theoretical Spreading Rate

1.2 - 2.0 sq.mt. / kg (depends upon the substrate condition and method of application).

Washability

N/A

Overcoat Interval

N/A

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

Gallonn size

25 Liters

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.

Range

Typical

Maximum

Minimum

Wet Film Thickness (micron)

400

500

300

Dry Film Thickness (micron)

244

307

183

Temperature

15oC

25oC

40oC

Drying Time (S/D)

5 hours

3 hours

2 hours

Dry Time (H/D)

22 hours

15 hours

10 hours

Air spray / Airless spray

Brush / Roller

Type of Thinner

Clean water

Clean water

Volume of Thinner

0 – 5%   10 – 15%

5 – 10%

Nozzle Orifice

0.022   1.5-2.0mm

-

Nozzle Pressure

2100 psi   3 – 5 bar

-

• Apply 1 coat of Rose Masonry Primer Interior ( Rose No. RS-6498 )
• Not required any filler coat.
• RS-6297 can be used as texture coat. On drying of texture coat any clear coat , pigmented coat of Chemicoat or Polyurethane can be applied .

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .

×

Contact Us here

Tel. +966-12-670 7700    Fax: +966-12-675 1643    P.O.Box 15162 Jeddah 21444, Saudi Arabia    Email : info@rosepaints.com