Homepage | Products | Exterior Paints|

Rosacryl vinyl emulsion white

Loading Updating cart...
Print



SAR 180 / 15 Liters

Rosacryl vinyl emulsion white

Rosacryl vinyl emulsion white

A superior quality interior / exterior plastic emulsion based on acrylic copolymer and some inert pigments. It is designed for very good finishing coat for very good hiding and scrub resistance as approved by SASO.

It is recommended for the use of most of the interior /exterior substrates like walls, ceilings of concretes, plasters, cement rendering, blocks, asbestos, plaster board and wood finishes. It is used as an excellent top coat with good color retention properties,alkali resistance,drying properties.

Color

White or any requested color.

Finish

Flat

Density (gm/cc)

1.50

Volume Solids %

38%

Theoretical Spreading Rate

12 sq. mt. / lt at 30 micron DFT(depends upon the substrate condition and method of application).

Washability

1000 – 1200 cycles

Overcoat Interval

4 hours

Flash Point

N/A

Mixing Ratio

N/A

Pot Life

N/A

Gallon size

15 liters

The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.Suitable for application to plaster, brick work, concrete, rendered surfaces and majority of the cement type building surfaces.

Range

Typical

Maximum

Minimum

Wet Film Thickness (micron)

120

150

85

Dry Film Thickness (micron)

43

55

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

2 hours

1 hour

30 minutes

Dry Time (H/D)

8 hours

4 hours

2 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Clean water

Clean water

Volume of Thinner

10 – 15%   0 – 5%

5 – 10% app

Nozzle Orifice

1.5-2.0mm   0.022"

-

Nozzle Pressure

3 – 5 bar   2100 psi

-

• Apply 1 coat of Rose Acrylic Sealer ( Rose No. RS-6499 )
• W/B plastic putty ( Rose No. RS-6350 ) can be applied and which can be sanded , cleaned and dried before the application of top coat finishes.
• 1-2 coats of RS-6198 as top coat can be applied over the filler coat .

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .

×

Contact Us here

Tel. +966-12-670 7700    Fax: +966-12-675 1643    P.O.Box 15162 Jeddah 21444, Saudi Arabia    Email : info@rosepaints.com