Rose flat enamel favourite
Product Description
A high quality alkyd flat finish coat based on alkyd resin pigmented with titanium di-oxide and some other inert pigments. It is specially designed to provide excellent hiding.
Principal Uses
It is recommended for the both interior and exterior surfaces like concrete, masonry, cement rendering, plasters, woods, and metals etc. It provides excellent color retention, good hiding, good adhesion, good scrub resistance and good flow and drying.
|
Color |
White or any requested color |
|
Finish |
Matte |
|
Density (gm/cc) |
1.50 |
|
Volume Solids % |
47% |
|
Theoretical Spreading Rate |
13 sq. mt/ lt at 35 micron DFT(depends upon the substrate condition & method of application) |
|
Washability |
N/A |
|
Overcoat Interval |
8 hours |
|
Flash Point |
38 deg. cel |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallon Size |
15 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
|
Range |
Typical |
Maximum |
Minimum |
|
Wet Film Thickness (micron) |
85 |
97 |
73 |
|
Dry Film Thickness (micron) |
35 |
40 |
30 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
4 hours |
3 hours |
2 hours |
|
Dry Time (H/D) |
9 hours |
6 hours |
2 hours |
Application Guidelines
|
|
Air spray / Airless spray |
Brush/Roller |
|
Type of Thinner |
Rose Decor Thinner |
Rose Decor Thinner |
|
Volume of Thinner |
5 – 10% 15 – 20% |
10 – 15% |
|
Nozzle Orifice |
0.021 1.0-1.5mm |
- |
|
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• Apply 1 coat of acrylic primer ( RS-6499 ) for cementous surfaces, alkyd primer (RS-5335) for the wooden surfaces and red oxide primer RS-5336) for all
melallic surfaces.
• Apply water based filler ( RS-6350 ) for the cementous surfaces to fill the gaps.
• 1-2 coats of Rose Flat Enamel( RS-5260 ) can be applied on the dry and clean
surfaces as top coat.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
