Homepage | Products | Industrial Paints|

Rose polyurethane gloss

Loading Updating cart...
Print



SAR 472 / 15 Liters

Rose polyurethane gloss

Rose polyurethane gloss

A superior quality 2 pack polyurethane high gloss based on polyester polyols and isocyanate resins.
Fractions with polyester polyol is considered as BASE component and fractions with isocyanate is
considered as HARDENER component .

It is recommended as a top coat mainly for the interior surfaces of concretes, plasters.
It is also recommended for the wooden and metallic surfaces. It provides excellent chemical and
weather resistance to the substrates, good abrasion and impact resistance and alkali resistance .

Color

White or any requested colors.

Finish

Glossy

Density (gm/cc)

1.15

Volume Solids %

38%

Theoretical Spreading Rat

12 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition & method of application)

Washability

N/A

Overcoat Interval

6 hours

Flash Point

28 degrees cel.

Mixing Ratio

2:1 - Base : Hardener ( v/v )

Pot Life

3 hours

Gallon Size

15 Liters

The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.

Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.

Range

Typical

Max

Min

Wet Film Thickness (micron)

79

105

79

Dry Film Thickness (micron)

30

40

30

Temperature

15oC

25oC

40oC

Drying Time (S/D)

3 hours

1 hour

30 minutes

Dry Time (H/D)

18 hours

6 hours

3 hours

Air spray / Airless spray

Brush/Roller

Type of Thinner

Rose PU Thinner

Rose PU Thinner

Volume of Thinner

0 – 5%   15 – 20%

10 – 15%

Nozzle Orifice

0.022   1.0-1.5mm

-

Nozzle Pressure

2100 psi   2 – 3 bar

-

• 1 coat of epoxy primer ( RS-5770 ) can be applied before the filler coat.
• An epoxy filler ( RS-5780) coat can be applied for the wooden and cementous
surfaces . Normally no filler coat is applied on the metal surfaces unless the
surface is very uneven.

• 1-2 coats of Rose Polyurethane Gloss (RS-5640) can be applied over the primer
coat or over the putty coat depending upon the substrate natures.

• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .

×

Contact Us here

Tel. +966-12-670 7700    Fax: +966-12-675 1643    P.O.Box 15162 Jeddah 21444, Saudi Arabia    Email : info@rosepaints.com