Product Description
A superior quality water based design paint which provides wonderful effects for interior decoration on walls.It is constituted with various components to provide attractive colors on the walls with glittering effects.
Principal Uses
Mira Finish is specially designed for interior decoration and readily used on walls, plasters, concretes,gypsum boards, plywoods etc. It is highly recommended for producing excellent sparkling effects on the interior walls of Palaces, Museums, Villas, Mosques, Restaurants, Art Gallaries etc.
Color |
Any color of glitter finish |
Finish |
Lustrous |
Density (gm/cc) |
1.60+/- 0.02 |
Volume Solids % |
44% |
Theoretical Spreading Rat |
14-15 sq.mt/ lt. (depends upon the substrate condition & method of application) |
Washability |
Satisfactory |
Overcoat Interval |
N/A |
Flash Point |
N/A |
Mixing Ratio |
N/A |
Pot Life |
N/A |
Gallonn size |
3.6 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable, firm,dry and free from laitance, dust and loose flaking materials, loose old paints, dirt, grease, wax and any other contaminations. Following steps of applications are required :
a) Apply one coat of primer sealer.
b) Apply putty to make the surface smooth.
Application Details
Application condition: Humidity and temperature should be max 70% and min 10 deg.cel
respectively
Range |
Typical |
Max |
Min |
Wet Film Thickness (micron) |
150 |
200 |
100 |
Dry Film Thickness (micron) |
30 |
40 |
20 |
Temperature |
15oC |
25oC |
40oC |
Drying Time (S/D) |
2 hours |
1 hour |
30 minutes |
Dry Time (H/D) |
6 hours |
3 hours |
2 hour |
Application Guidelines
|
Air spray / Airless spray |
Brush/Roller |
Type of Thinner |
- - |
Clean water |
Volume of Thinner |
- - |
Ready for use |
Nozzle Orifice |
- |
- |
Nozzle Pressure |
- |
- |
Specific Tool Used |
|
Plastic Knife |
Paint System Advice
Top Coat |
Apply 1 coat of Rose primer sealer before the application of putty coat. |
Filler coat |
Apply Rose putty over the over the primer sealer for the smooth finish. |
Top coat |
Apply 1st coat of RS-6887, Rose Magic Touch Tex Coat through professional painter with the help of knife as base coat. Then apply 2nd coat of the same by knife to make desired designs. Make sanding by sand paper before the application of Magic Touch Top Coat ( RS-6889 ). |
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Incase of skin contact,wash thoroughly with soap and water.
• For eye contact flush plenty of water and seek a physian.
• Keep containers tightly closed when not in use.
Tel. +966-12-670 7700 Fax: +966-12-675 1643 P.O.Box 15162 Jeddah 21444, Saudi Arabia Email : info@rosepaints.com