Rose décor high gloss
Product Description
A premium quality alkyd high gloss finish based on alkyd resin pigmented with titanium di-oxide and some other additives.It is specially designed to provide excellent hiding and gloss. This quality has been approved by SASO.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks, metal surfaces, concrete, cements, plasters etc.
|
Color |
White or any requested colors. |
|
Finish |
Glossy |
|
Density (gm/cc) |
1.15 |
|
Volume Solids % |
33.6% |
|
Theoretical Spreading Rate |
11 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition & method of application) |
|
Washability |
N/A |
|
Overcoat Interval |
10 hours |
|
Flash Point |
38 deg. cel |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallonn size |
15 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
|
Range |
Typical |
Maximum |
Minimum |
|
Wet Film Thickness (micron) |
89 |
120 |
89 |
|
Dry Film Thickness (micron) |
30 |
40 |
30 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
8 hours |
4 hours |
2 hours |
|
Dry Time (H/D) |
12 hours |
10 hours |
8 hours |
Application Guidelines
|
|
Air spray / Airless spray |
Brush/Roller |
|
Type of Thinner |
Rose Decor Thinner |
Rose Decor Thinner |
|
Volume of Thinner |
0 – 5% 15 – 20% |
5 – 10% |
|
Nozzle Orifice |
0.022 1.5-2.0mm |
- |
|
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• An alkyd primer ( RS-5335 ) or an acrylic emulsion based primer ( RS-6499 )can be applied over the substrate to be painted.
• RS-6350 can be applied for the wooden and cementous substrates. Normally
no putty is applied on the metal surfaces unless the surface is very uneven.
• 1-2 coats of RS-5177 can be applied over the primer coat or over the putty coat
depending upon the substrate nature.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
