Rose marblita stucco
Product Description
A premium quality water based stucco which provides wonderful effects for interior decorationon walls. It is constituted with two different components to provide varous attractive colors on the wall with magical marble effects.
Principal Uses
Marblita stucco is specially designed for the interior decoration and readily used on the walls, plasters, concrete, gypsum board, woodboard etc. It is highly recommended for producing excellent marble effects on the interior walls of Palaces, Museums, Villas, Mosques, Restaurant, Art Galleries etc.
Technical Data
|
Color |
White or any requested color |
|
Finish |
Marble finish |
|
Density (gm/cc) |
1.78+/- 0.02 |
|
Volume Solids % |
50% |
|
Theoretical Spreading Rat |
1.2 - 2.0 sq.mt./ kg (depends upon the substrate condition & method of application) |
|
Washability |
100 – 200 cycles |
|
Overcoat Interval |
1 hour |
|
Flash Point |
N/A |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallonn size |
14 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
Application condition: Humidity and temperature should be max 70% and min 10 deg.cel
respectively
|
Range |
Typical |
Max |
Min |
|
Wet Film Thickness (micron) |
300 |
400 |
240 |
|
Dry Film Thickness (micron) |
150 |
200 |
120 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
2 hours |
1 hour |
30 minutes |
|
Dry Time (H/D) |
6 hours |
3 hours |
2 hour |
Application Details
|
|
Air spray / Airless spray |
Knife |
|
Type of Thinner |
- - |
Clean water |
|
Volume of Thinner |
- - |
Ready for use |
|
Nozzle Orifice |
- - |
- |
|
Nozzle Pressure |
- - |
- |
|
Specific Tool Used |
|
Knife |
Paint System Advice
|
Top Coat |
Apply 1-2 coats of Rose primer (RS-6498). |
|
Filler coat |
1coat of Rose Linseed Filler Putty (RS-6370). |
|
Top coat |
Apply 2-3 coats for RS-6398, Rose Marblita Stucco through professional painter with the help of stainless steel spatula and trowel. Make the glossy finish with the help of repeated rubbing. |
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Incase of skin contact,wash thoroughly with soap and water.
• For eye contact flush plenty of water and seek a physian.
• Keep containers tightly closed when not in use.
