Rose royal top coat
Product Description
A premium quality water based design paint which provideds wonderful effects for interior decoration on walls.It is constitutedwith various components to provide attractive colors on the walls with sparkling effects.
Principal Uses
Royal is specially designed for interior decoration and readily used on walls, plasters, concretes, gypsum boards, plywoods etc. It is highly recommended for producing excellent sparkling effects on the interior walls of Palaces, Museums, Villas, Mosques, Restaurants, Art Gallaries etc.
|
Color |
|
|
Any color of silver finish |
|
|
Finish |
|
|
Lustrous |
|
|
Density (gm/cc) |
|
|
1.086+/- 0.02 |
|
|
Volume Solids % |
20% |
|
Theoretical Spreading Rat |
7-8 sq.mt/ lt. (depends upon the substrate condition & method of application) |
|
Washability |
Satisfactory |
|
Overcoat Interval |
N/A |
|
Flash Point |
N/A |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallonn size |
3.6 Liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a
cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable, firm,dry and free from laitance, dust and loose flaking materials, loose old paints, dirt, grease, wax and any other contaminations. Following steps of applications are required :
a) Apply one coat of primer sealer.
b) Apply putty to make the surface smooth.
Application Details
Application condition: Humidity and temperature should be max 70% and min 10 deg.cel
respectively
|
Range |
|||
|
Typical |
Max |
Min |
|
|
Wet Film Thickness (micron) |
150 |
200 |
100 |
|
Dry Film Thickness (micron) |
30 |
40 |
20 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
2 hours |
1 hour |
30 minutes |
|
Dry Time (H/D) |
6 hours |
3 hours |
2 hour |
Application Guidelines
|
|
||
|
Air spray / Airless spray |
Brush/Roller |
|
|
Type of Thinner |
- |
Clean water |
|
Volume of Thinner |
- |
Ready for use |
|
Nozzle Orifice |
- |
- |
|
Nozzle Pressure |
- |
- |
|
Specific Tool Used |
|
Knife |
Paint System Advice
|
Top Coat |
Apply 1 coat of Rose primer sealer before the application of putty coat. |
|
Filler coat |
Apply Rose putty over the over the primer sealer( RS-6498) for the smooth finish. |
|
Top coat |
Apply the following coats over the pre-coated with primer and putty: |
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Incase of skin contact,wash thoroughly with soap and water.
• For eye contact flush plenty of water and seek a physian.
• Keep containers tightly closed when not in use.
×
Contact Us here
Tel. +966-12-670 7700 Fax: +966-12-675 1643 P.O.Box 15162 Jeddah 21444, Saudi Arabia Email : info@rosepaints.com