Rose chemicoat semi gloss
Product Description
A high quality acrylic semi - gloss finish based on TPA resin pigmented with titanium-dioxide and some other additives.It is designed to provide excellent good hiding,semi-gloss and non-yellowing properties.
Principal Uses
It is recommeded for interior and exterior surfaces like wooden blocks, metal surfaces, concrete, cements, plasters etc.
|
Color |
White or any requested colors. |
|
Finish |
Semi-Glossy |
|
Density (gm/cc) |
1.20 |
|
Volume Solids % |
31% |
|
Theoretical Spreading Rate |
11 sq. mt/ lt at 30 micron DFT(depends upon the substrate condition & method of application) |
|
Washability |
N/A |
|
Overcoat Interval |
2 hours |
|
Flash Point |
28 deg. cel |
|
Mixing Ratio |
N/A |
|
Pot Life |
N/A |
|
Gallon size |
15 liters |
Storage
The product must be stored in accordance with national regulations.The product must be kept in a cool and well-ventilated place ,protected from heat and direct sunlight.
Surface Preparation
Should be stable , firm, dry and free from laitance,dust and loose flaking materials,loose old paints, dirt, grease, wax and any other contaminations.
Application Details
|
Range |
Typical |
Maximum |
Minimum |
|
Wet Film Thickness (micron) |
96 |
129 |
80 |
|
Dry Film Thickness (micron) |
30 |
40 |
25 |
|
Temperature |
15oC |
25oC |
40oC |
|
Drying Time (S/D) |
2 hours |
30 minutes |
15 minutes |
|
Dry Time (H/D) |
4 hours |
2 hours |
1 hour |
Application Guidelines
|
|
Air spray / Airless spray |
Brush/Roller |
|
Type of Thinner |
Rose Chemicoat Thinner |
Rose Chemicoat Thinner |
|
Volume of Thinner |
0 – 5% 15 – 20% |
5 – 10% |
|
Nozzle Orifice |
0.022 1.5-1.8mm |
- |
|
Nozzle Pressure |
2100 psi 2 – 3 bar |
- |
Paint System Advice
• A N.C. primer ( RS-5580 ) or an acrylic emulsion based primer ( RS-6499 ) can be applied over the substrate for painting use.
• RS-6350 can be applied for the wooden and cementous surfaces . Normally no filler coat is applied on the metal surfaces unless the surface is very uneven.
• Apply 1-2 coats of Rose Chemicoat semi-gloss (RS-5460 ) as top coat.
Safety Precaution
• Avoid contact with eyes and prolonged contact with skin.
• Keep containers tightly closed when not in use .
